Convert worn, shabby and colorless pool decks into beautiful recreational areas on both new and old decks. Cracks, pits and breaks in the concrete may be patched and then painted with Patio Tones. Can be rolled on wet surfaces and cleans up with water. All surfaces must be properly cleaned prior to application. After sweeping away loose debris, use a stiff bristled patio broom to scrub the surface with a solution of tri-sodium phosphate and water. This removes suntan lotions and oils which will inhibit penetration of the Patio Tones. Rinse very well when done, now using a 10 - 15% solution of muriatic acid scrub the deck again. Rinse approximately every 20 feet. Upon completion, and after thorough rinsing, wash again with tri-sodium phosphate solution to neutralize any remaining traces of acid. Rinse and allow standing water to dissipate. Select Color Above: W-475 - Ivory (cream), gallon W-469 - Champagne (very light - bone), gallon W-478 - Warm biscuit (beige), gallon W-467 - Silk straw (tan), gallon W-463 - Desert sun (light beige/tan), gallon W-465 - Sand valley (darker beige), gallon W-472 - Mystic gray (light gray), gallon W-466 - Creekstone (grey), gallon Please Note: Paint color samples on this page may appear different for your application. Aqua Pure is not responsible for color variance or color charts provided by the manufacturer.